Basic Specification

 50% Kynar 500^® (AAMA 2604)

FINISHES:

1. General:  Finish on exposed aluminum shall be compliant with the performance standards set forth in AAMA Specification 2604-98, “High Performing Organic Coatings on Aluminum”.

2. Type:  Factory-applied, high performance, 50% Polyvinylidene Fluoride (PVDF) coating based on Arkema, Inc. Kynar 500^® or Solvay Solexis, Inc. Hylar 5000^® resin, formulated by a licensed paint manufacturer, and applied by paint manufacturer’s warranty-approved applicator.

3. Pretreatment:  Applicator to pretreat the aluminum with solutions to remove organic and inorganic surface soils, remove residual oxides, followed by a chrome phosphate or chrome free conversion coating to ensure adhesion of paint to the aluminum.

4. Color:  {Specifier to insert color code here, e.g. LT606 Hartford Green}.

APPROVED APPLICATORS:

1. Linetec