Basic Specification

 Class I Anodize (AAMA 611)

FINISHES:

  1. General:  Finish on exposed aluminum shall be compliant with the performance standards set forth in AAMA Specification 611, “Anodized Architectural Aluminum”.

  2. Aluminum Association Designation:   AA-M10C22A41* (Class I Clear) or AA-M10C22A44* (Class I Color)

  3. Color:  {Specifier to insert color code/name here, e.g. LT215 Clear}.  Color not to vary by more than 5E total.
                    * M10 - Unspecified Mechanical Finish     C22 - Medium Matte Etch   

                        A41 - Architectural Class I Clear Finish    A44 - Architectural Class I Electrolytically deposited color

 

APPROVED APPLICATORS:

  1. Linetec