CAUTION: This coating is suitable for interior, not exterior, components

 Basic Specification

 Baked Enamel (AAMA 2603)

FINISHES:

1. General:  Finish on exposed aluminum shall be compliant with the performance standards set forth in AAMA Specification 2603-98, “Pigmented Organic Coatings on Aluminum”.

2. Type:   Factory-applied, baked enamel coating, formulated by a licensed paint manufacturer, and applied by paint manufacturer’s warranty-approved applicator.

3. Pretreatment:  Applicator to pretreat the aluminum with solutions to remove organic and inorganic surface soils, remove residual oxides, followed by a chrome phosphate or chrome-free conversion coating to ensure adhesion of paint to the aluminum.

4. Color:  {Specifier to insert color code here, e.g. LT606 Hartford Green}.

APPROVED APPLICATORS:

1. Linetec